Інновації та стандартизація електрообладнання електромобілів для технічної уніфікації та енергоефективності

Автор(и)

  • Наталія Олексіївна Ореховська Separate structural subdivision Odessa Automobile and Road Professional College National University “Odessa Polytechnic” http://orcid.org/0009-0003-0724-8295
  • Юлія Володимирівна Шихірева Separate structural subdivision Odessa Automobile and Road Professional College National University “Odessa Polytechnic”, https://orcid.org/0009-0006-9950-1551

DOI:

https://doi.org/10.15276/opu.2.72.2025.09

Ключові слова:

електромобільність, стандартизація, уніфікація, електрообладнання, зарядна інфраструктура, енергоефективність, кібербезпека, локальне виробництво, ринок електромобілів, гармонізація стандартів

Анотація

Стаття присвячена аналізу проблем і перспектив стандартизації електрообладнання електромобілів, що забезпечує технічну сумісність, енергоефективність і зниження собівартості виробництва. Досліджено міжнародні стандарти, які регулюють системи живлення, зарядну інфраструктуру, протоколи зв’язку та захист від кібератак. Основними викликами є регіональні відмінності в стандартах, різноманітність протоколів зв’язку, вразливості до кіберзагроз і фрагментація технологій бездротової зарядки. У контексті України обмежена інфраструктура зарядних станцій, воєнні ризики та пільги на імпорт компонентів створюють унікальні можливості для розвитку локального виробництва. Запропоновано підходи до гармонізації стандартів, зокрема впровадження єдиних технічних вимог і технологій взаємодії транспортних засобів із електромережею, що сприяють інтеграції штучного інтелекту для оптимізації зарядки. Уніфікація стандартів може знизити собівартість виробництва електрообладнання на 15–20%, підвищити енергоефективність і розширити доступність зарядної інфраструктури. В Україні гармонізація стандартів сприятиме залученню інвестицій, розвитку сталого ринку електромобілів і покращенню споживчого сприйняття. Перспективи включають створення єдиної мережі зарядних станцій, сумісної з міжнародними стандартами, що стимулюватиме зростання електромобільної галузі та інтеграцію з європейськими ринками. Стаття підкреслює необхідність співпраці між виробниками, урядом і міжнародними організаціями для подолання технічних і ринкових бар’єрів, що є ключовим для масштабування електромобільності в Україні та світі.

Завантаження

Дані завантаження ще не доступні.

Посилання

Alanazi, F. (2023). Electric vehicles: Benefits, challenges, and potential solutions for widespread adoption. Applied Sciences, 13(10), Article 6016. DOI: https://doi.org/10.3390/app13106016.

Wajdi, W., & Chakir, A. (2019). Electric vehicles standards, charging infrastructure, and impact on grid integration: A technological review. Renewable and Sustainable Energy Reviews, 120, Article 109618. DOI: https://doi.org/10.1016/j.rser.2019.109618.

Davydov, V. O., & Stafidov, Ye. B. (2023). Use of charging stations for electric vehicles as a way of balancing the electrical load of energy systems. ISG-Journal, (12), 45–52. Available at https://isg-journal.com/isjea/article/download/563/315/570.

Zakharchenko, Yu. V., et al. (2025). Marketing in the electric power industry of Ukraine: Problems and prospects of the market of charging stations for electric vehicles. Economic Bulletin of Dnipro Polytechnic, (2), 79–91. DOI: https://doi.org/10.33271/ebdut/90.079.

Kakkar, R., et al. (2022). A review on standardizing electric vehicles community charging infrastructures. Applied Sciences, 12(23), Article 12096. DOI: https://doi.org/10.3390/app122312096.

Funke, S. Á., et al. (2018). How much charging infrastructure do electric vehicles need? A review of the evidence and international comparison. Transportation Research Part D: Transport and Environment, 59, 224–242. DOI: https://doi.org/10.1016/j.trd.2018.03.004.

U.S. Department of Transportation, Federal Highway Administration. (2025). Implementation challenges and evolving solutions for rural electrification of electric vehicle chargers. Available at https://www.transportation.gov/rural/ev/toolkit/ev-benefits-and-challenges/challenges-and-evolving-solutions.

International Code Council. (2023). Standardization roadmap for electric vehicles. https://share.ansi.org/evsp/ANSI_EVSP_Roadmap_June_2023.pdf.

Lieven, T. (2015). Policy measures to promote electric mobility – A global perspective. Transportation Research Part A: Policy and Practice, 82, 165–178. DOI: https://doi.org/10.1016/j.tra.2015.09.008.

Stetsiuk, O. V., et al. (2024). Electromobility in Ukraine: Realities of development, European context and the impact of martial law. Scientific Innovations and Progressive Technologies, 9(37), 770–795. DOI: https://doi.org/10.52058/2786-5274-2024-9(37)-770-795.

Lezman, R. (2024). EV chargers: Navigating the road to standardization. Electrical Contractor Magazine. Available at https://www.ecmag.com/magazine/articles/article-detail/ev-chargers-navigating-the-road-to-standardization.

Federal Highway Administration, U.S. Department of Transportation. (2023, February 28). National electric vehicle infrastructure standards and requirements: Final rule. Federal Register. Available at https://www.federalregister.gov/documents/2023/02/28/2023-03500/national-electric-vehicle-infrastructure-standards-and-requirements.

International Electrotechnical Commission. (2016). Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories (IEC Standard No. 62196-2:2016). Available at https://webstore.iec.ch/en/publication/24204.

International Organization for Standardization. (2019). Road vehicles – Vehicle to grid communication interface – Part 1: General information and use-case definition (ISO Standard No. 15118-1:2019). Available at https://www.iso.org/standard/69113.html.

SAE International. (2023). North American Charging Standard (NACS) (SAE Standard No. J3400:2023). Available at https://www.sae.org/standards/content/j3400_202312.

International Organization for Standardization. (2021). Electrically propelled road vehicles – Safety specifications – Part 3: Protection of persons against electric shock (ISO Standard No. 6469-3:2021). Available at https://www.iso.org/obp/ui/#iso:std:iso:6469:-3:ed-4:v1:en.

International Electrotechnical Commission. (2017). Electric vehicle conductive charging system – Part 1: General requirements (IEC Standard No. 61851-1:2017). Available at https://webstore.iec.ch/publication/33644.

SAE International. (2017). Electric vehicle and plug in hybrid electric vehicle conductive charge coupler (SAE Standard No. J1772:2017). Available at https://www.sae.org/standards/content/j1772_201710.

International Organization for Standardization. (2021). Road vehicles – Cybersecurity engineering (ISO/SAE Standard No. 21434:2021). Available at https://www.sae.org/standards/content/j1772_201710.

International Electrotechnical Commission. (2020). Electric vehicle wireless power transfer (WPT) systems – Part 1: General requirements (IEC Standard No. 61980-1:2020). Available at https://webstore.iec.ch/publication/67729.

Standardization Administration of China. (2023). Communication protocols between off-board conductive charger and battery management system for electric vehicle (Standard No. GB/T 27930-2023). Available at https://www.chinesestandard.net/PDF.aspx/GBT27930-2023.

International Electrotechnical Commission. (2022). Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories (IEC Standard No. TS 62196-4:2022). Available at https://standards.iteh.ai/catalog/standards/sist/b94f4603-aceb-4777-9eb0-4018ae1b00c8/iec-ts-62196-4-2022.

United Nations Economic Commission for Europe. (2021). UN Regulation No. 155 – Cybersecurity and cybersecurity management system. Available at https://unece.org/sites/default/files/2021-03/R155e.pdf.

United Nations Economic Commission for Europe. (2021). UN Regulation No. 156 – Uniform provisions concerning the approval of vehicles with regards to software update and software updates management system. Available at

https://op.europa.eu/en/publication-detail/-/publication/ec74fcfc-8079-11eb-9ac9-01aa75ed71a1.

International Electrotechnical Commission. (2018). Electric vehicle conductive charging system – Part 21-2: EMC requirements for off-board electric vehicle charging systems (IEC Standard No. 61851-21-2:2018). Available at

https://webstore.iec.ch/en/publication/31282.

International Organization for Standardization. (2019). Electrically propelled road vehicles – Safety specifications – Part 1: Rechargeable energy storage system (RESS) (ISO Standard No. 6469-1:2019). Available at https://www.iso.org/standard/68665.html.

International Organization for Standardization. (2025). Electrically propelled road vehicles – Functional and safety requirements for power transfer between vehicle and external electric circuit – Part 4: Magnetic field wireless power transfer (ISO Standard No. 5474-4:2025). Available at https://www.iso.org/standard/81300.html.

##submission.downloads##

Опубліковано

2025-10-03

Як цитувати

[1]
Orekhovskaya, N. і Shikhireva, Y. 2025. Інновації та стандартизація електрообладнання електромобілів для технічної уніфікації та енергоефективності. Праці Одеського політехнічного університету. 2(72) (Жов 2025), 81–89. DOI:https://doi.org/10.15276/opu.2.72.2025.09.