No. 1(71) (2025): Proceedings of Odessa Polytechnic University

Machine building

Modeling of quality characteristics at the finishing operations of workpieces using vibration resistance indicators

Anatolii Usov, Maksym Kunitsyn

7-21
- Usov
Experimental determination of the influence of spindle imbalance with boring bar on machining accuracy

Andrii Orhiian, Anna Balaniuk, Alexander Orgiyan, Vasyl Kolesnik, Pavlo Prokopovych

22-32
- Orhiian
Structural analysis of a third-class ten-link mechanism with two complex links

Sergey Koshel, Hanna Koshel, Mark Zalyubovskii, Serhii Popovichenko, Oleksandr Koshel

33-38
- Koshel
Control of the milling mode of a thin-walled console plate by indirect indicators

Andrew Tkach, Ihor Sydorenko, Ihor Prokopovych, Volodymyr Kurhan, Alla Toropenko

39-46
- Tkach
Increasing the machining productivity of the firing pin body part through automated tool selection

Oleksandr Yevdokymov, Vitalii Kolesnyk, Andrii Dovhopolov, Vadym Basov, Artem Lazarenko

47-55
- Yevdokymov

Energetics

Study of the modes of re-enable the asynchronous electric drive of a centrifugal pump

Andrii Boiko, Valerii Plis, Serhii Zabrotskyi, Yevhen Sokolov

56-63
- Boiko
Simulation of thermal modes of the absorption thermotransformer with heat pipes

Oleksandr Titlov, Konstantin Ponomaryov

64-74
- Titlov
Autonomous hybrid system of combined energy supply with renewable energy sources

Hennadii Balasanian, Vitalii Verstak, Artem Ostapenko

75-81
- Balasanian
Thermal and hydraulic calculation of a Delta 125 steam generator for a power unit with an AP1000 reactor

Mark Galatsan, Ihor Salahor

82-88
- Galatsan
Energy efficiency analysis of water heating system gas condensing boilers

Ganna Luzhanska, Galina Diachenko, Yuriy Bessatyan, Oleksandr Tarasiuk, Igor Sergeiev

89-97
- Luzhanska
Determination of the probability of failures in the operation of elements of urban heat supply systems in extreme operating conditions

Anton Mazurenko, Anatoliy Pustovit, Pavel Shylov, Denis Shylov, Volodymyr Stanislavov

98-103
- Mazurenko
Increasing the efficiency of ground-source heat pumps based on consumer operating mode data

Volodymyr Shevchuk, Yurii Riepin, Oleh Palamarchuk, Oleksandr Furkalenko, Sergii Gryshchenko

104-110
- Shevchuk
Qualification of strategies for modernizing test frequency of safety systems at nuclear power facilities with extended time of fuel campaigns

Volodymyr Skalozubov, Iurii Katsarskyi, Yevhenii Mazur, Valeriia Kochnieva, Ivan Verbylo

111-118
- Skalozubov
Prediction of transboundary pollution of air and soil in Odesa region by fly ash from Moldavian SDPP

Oleksandr Butenko, Sergiy Melnyk, Anzhelika Karamushko, Kateryna Vasiutynska, Viktor Liesnikov, Volodymyr Zherdenko

119-126
- Butenko
Features of parameter formation when comparing the efficiency of passenger elevators electric drives

Andrii Boiko, Artem Savieliev, Ivan Klymchuk, Dmytro Ihnatenko

127-136
- Boiko

Informacion technology. Automation

Method for creating a digital atlas of 3d models of human anatomy for prosthetics

Albert Volkov, Svitlana Antoshchuk

137-144
- Volkov
Segmentation-based approach for object detection

Natalia Volkova, Maksym Shvandt

145-156
- Volkova
Development of a criterion for selecting the level of wavelet decomposition for QRS detection in electrocardiogram signals using energy and entropy

Galina Shcherbakova, Daria Koshutina

157-166
- Shcherbakova
Formation of a signal with Hartley amplitude-phase modulation as the sum of two signals with Hartley amplitude modulation

Aleksandr Kokhanov

167-177
- Kokhanov
Peculiarities of BIM Technology Integration in Construction Industry Enterprises of Ukraine

Andriy Chumachenko

178-189
- Chumachenko
Mathematical model of heat transfer in the “frozen casting mold – anti-adhesive coating – metal” system based on cellular automata

Mykola Zamiatin, Tetiana Lysenko, Vladyslav Zamiatin, Yurii Morozov, Kyryll Kreitser

190-199
- Zamiatin
Hybrid intelligent adaptive fiber system for reducing nonlinear effects in WDM systems with metrological aspects

Oleksandr Kokhanov, Ihor Prokopovych, Tetiana Sikach

200-209
- Kokhanov

Chemistry. Pharmaceutical technologies. Biomedical engineering

Quantitative structure-property relationship analysis of critical properties of individual organic compounds

Egor Pesterev, Liudmyla Ognichenko, Anatoliy Artemenko, Mariia Kichova, Nail Muratov, Victor Kuz’min

220-234
- Pesterev
Laboratory technology for extraction and analysis of vegetable oils

Ildar Rakipov, Olga Protunkevych, Liubov Ponomarova, Ivan Gaidarzhy, Yurii Yeputatov

210-219
- Rakipov

Full Issue

Machine building

Modeling of quality characteristics at the finishing operations of workpieces using vibration resistance indicators

Experimental determination of the influence of spindle imbalance with boring bar on machining accuracy

Structural analysis of a third-class ten-link mechanism with two complex links

Control of the milling mode of a thin-walled console plate by indirect indicators

Increasing the machining productivity of the firing pin body part through automated tool selection

Energetics

Study of the modes of re-enable the asynchronous electric drive of a centrifugal pump

Simulation of thermal modes of the absorption thermotransformer with heat pipes

Autonomous hybrid system of combined energy supply with renewable energy sources

Thermal and hydraulic calculation of a Delta 125 steam generator for a power unit with an AP1000 reactor

Energy efficiency analysis of water heating system gas condensing boilers

Determination of the probability of failures in the operation of elements of urban heat supply systems in extreme operating conditions

Increasing the efficiency of ground-source heat pumps based on consumer operating mode data

Qualification of strategies for modernizing test frequency of safety systems at nuclear power facilities with extended time of fuel campaigns

Prediction of transboundary pollution of air and soil in Odesa region by fly ash from Moldavian SDPP

Features of parameter formation when comparing the efficiency of passenger elevators electric drives

Informacion technology. Automation

Method for creating a digital atlas of 3d models of human anatomy for prosthetics

Segmentation-based approach for object detection

Development of a criterion for selecting the level of wavelet decomposition for QRS detection in electrocardiogram signals using energy and entropy

Formation of a signal with Hartley amplitude-phase modulation as the sum of two signals with Hartley amplitude modulation

Peculiarities of BIM Technology Integration in Construction Industry Enterprises of Ukraine

Mathematical model of heat transfer in the “frozen casting mold – anti-adhesive coating – metal” system based on cellular automata

Hybrid intelligent adaptive fiber system for reducing nonlinear effects in WDM systems with metrological aspects

Chemistry. Pharmaceutical technologies. Biomedical engineering

Quantitative structure-property relationship analysis of critical properties of individual organic compounds

Laboratory technology for extraction and analysis of vegetable oils

Current Issue

Browse

Language

Information