Determination of thermal characteristics of combustion products of fire-tube heat generator with flow turbulator
DOI:
https://doi.org/10.15276/opu.2.44.2014.20Keywords:
fire-tube heat generator, convective tube, turbulator, degree of overlap, heat transfer coefficientAbstract
Boiler construction is one of the major industries of any state. The aim is to determine the effect of the turbulator on the intensity of heat transfer in the convective part of the fire-tube heat generator of domestic production. The improvement of convective heating surfaces is one of the ways to increase the energy efficiency of the fire-tube heat generator. Since model of the process of heat transfer of gas flow in the convective tubes is multifactorial and does not have clear analytical solution at present, the study of process above is carried out using the experimental method. The results of applying the flow turbulator as a broken tape in the fire-tube heat generator of KV-GM type are presented. On their basis it can be concluded about increasing of heat transfer in convective part of the unit. The use of efficient, reliable, easy to manufacture, relatively inexpensive turbulator in domestic fire-tube heat generators will allow to increase their energy conversion efficiency and reduce fuel consumption, which will have a positive economic effect.
Downloads
References
Интенсификация теплообмена – рациональный способ повышения эффективности газотрубных котлоагрегатов / И.А. Попов, А.Б. Яковлев, А.В. Щелчков, Д.В. Рыжков // Энергетика Татарстана. — 2010. — № 4. — С. 8—15.
Дрейцер, Г.А. Влияние геометрической формы турбулизаторов на эффективность интенсификации конвективного теплообмена в трубах / Г.А. Дрейцер, А.С. Мякочин // Теплоэнергетика. — 2002. — № 6. — С. 57—59.
Selvam, S. Effect of wire coiled coil matrix turbulators with and without bonding on the wall of the test section of concentric tube heat exchanger / S. Selvam, Pr. Thiyagarajan, S. Suresh // Thermal Science. — 2012. — Vol. 16, No. 4. — РР. 1151—1164.
Yadav, A.S. Experimental investigation of heat transfer performance of double pipe U-bend heat exchanger using full length twisted tape / A.S. Yadav // International Journal of Applied Engineering Research. — 2008. — Vol. 3, No. 3. — PP. 399—407.
К вопросу об определении размеров топки теплогенераторов с жаровой трубой / М.З. Флер, С.А. Губарь, А.В. Лукьянов, В.Ф. Губарь // Коммунальное хозяйство городов. — 2002. — Вып. 38. — С. 179—182.
Теплосиловые системы. Оптимизационные исследования : монография / А.М. Клер, Н.П. Деканова, Э.А. Тюрина [и др.]; отв. ред. Э.А. Таиров. — Новосибирск: Наука, 2005. — 236 с.
