Increasing long-term strength of Zr-1%Nb alloy by diffusive hardening of near-surface layer.
DOI:
https://doi.org/10.15276/opu.2.55.2018.06Keywords:
zirconium, thermochemical treatment, oxygen, nitrogen, near-surface layer, long-term strengthAbstract
Zirconium alloys are widely used as structural material in nuclear industry for fabrication of nuclear fuel claddings (NFC). The operational reliability of these structures is an important element of reliability of the entire fuel cycle, given that the structures operate at elevated temperatures. The development of finishing thermochemical treatment modes of Zr-1%Nb alloy NFC is an important and actual task in the field of materials science of zirconium and its alloys. The aim of the work is to determine the influence of thermal treatment in various controlled gas media (vacuum, oxygen-containing, nitrogen-containing) on the long-term strength of the Zr-1%Nb alloy samples at 380 °C in air. The experimental material is 3 mm ring-samples with a 0.5 mm depth V-shaped concentrator, which are cut from NFC tubes of the Zr-1%Nb alloy of Ukrainian production. In order to test long-term strength of Zr-1%Nb alloy ringsamples at T=380 °C in air a multipositional assembly was used. The assembly was designed and manufactured in the Karpenko PhysicoMechanical institute of the National Academy of Sciences of Ukraine. Special grips were developed and produced for mounting ring-samples on a long-term strength test. Thermochemical treatment was conducted in a rarefied (P=1·10–4 mm Hg) gas medium (vacuum), as well as in rarefied oxygen- and nitrogen-containing gas media at temperature T=580...650 °C and at the exposure =3...10 h. The influence of
oxidation, nitration and vacuum treatment on thickness and microhardness of surface layers of zirconium ring-samples, as well as resistance to delayed failure under a static long-term load are studied experimentally. Also it has been experimentally established that the treatment of
zirconium ring-samples of the Zr-1%Nb alloy in oxygen-containing and nitrogen-containing gas media with respect to vacuum annealing raises the destructive stresses with a prolonged static load at a temperature of 380 °C in air. The differences in fracture surface of nearsurface layer of the Zr-1%Nb alloy ring-samples, depending on the processing mode, are shown in the paper.
Downloads
References
Lemaignan, C., & Motta, A.T. (2006). Zirconium Alloys in Nuclear Applications. Materials Science and Technology, 2–51. DOI: https://doi.org/10.1002/9783527603978.mst0111.
Damien, Feron (Eds.). (2012). Nuclear corrosion science and engineering. Woodhead Publishing Limited. P. 1061.
Tararaeva, E.M., & Murav’eva, L.S. (1973). Effect of oxygen and tin on the mechanical properties of zirconium alloys with 1 and 2.5 % Nb. Structure and properties of alloys for nuclear power engineering. Moscow: Nauka.
Voitovich, R.F. (1989). Oxidation of zirconium and its alloys. Kiev: Science dumka.
Kalin, B.A., Platonov, P.A., Chernov, I.I., & Strombakh, Ya.I. (2008). Physical Material Science. 6. Part 1. Structural materials of nuclear engineering. Moscow: MIFI.
Vakhrusheva, V.S., Kolenkova, O.A., & Sukhomlin, G.D. (2005). Effect oxygen content on plasticity, damage and acustic emission parameters of Zr-1%Nb tubes. Problems of Atomic Science and Technology. 5(88). 104–109.
Chernyaeva, T.P., Stukalov, A.I., & Gritsina, V.M. (2002). Effect of oxygen on the mechanical properties of zirconium. Problems of Atomic Science and Technology. 1(12). 96–102.
Chernov, I.I, Kalin, B.A., Binyukova, S.Yu., & Staltsov M.S., (2007). Effect of alloying and heat treatment on the structure and properties of zirconium: a textbook. Moscow: MEPhI.
Steinbrilck, M., & Gross, V. (2014). Deviations from parabolic kinetics during oxidation of zirconium alloys .Zirconium in the Nuklear indusrry: 17th International Symposium on Zirconium in the Nuclear Industry on February 3–7, Hyderabad, India. P. 979-1001. DOI: 10.1520/STP154320130022.
Selmi Noureddine, Sari Ali. (2013). Study of Oxidation Kinetics in Air of Zircaloy-4 by in Situ X-Ray Diffraction. Advances in Materials Physics and Chemistry, 3, 2, 168–173. DOI: 10.4236/ampc.2013.32023.
Gribaudo, L., Arias, D., & Abriata, J. (1994). The N-Zr (Nitrogen-Zirconium) system. Journal of Phase Equilibria, 4(15), 441–449.
Nikulin, S.A., Rozhnov, A.B., & Gusev, A.Yu., et al. (2004). Fracture resistance of Zr-Nb alloys under low-cycle fatigue tests. Journal of Nuclear Materials, 446, 1–3, 10–14. DOI: https://doi.org/10.1016/j.jnucmat.2013.11.039.
Lee, D., & Hill, P.T. (1976). Effect of oxygen on the fatigue behavior of Zircaloy. Journal of Nuclear Materials, 60, 227–230.
Azhazha, В.М., Borts, B.V., & Butenko, І.М. et al. (2006). Production of the party of round billets for trex-pipes and making of the experimental industrial party of pipes from Zr1Nb alloy from domestic raw materials. Science and Technology, 2(6), 18–30. DOI: 10.15407/scin2.06.018.
Birchley, J., & Leticia, F-M. (2012). Simulation of air oxidation during a reactor accident sequence: Part 1 -Phenomenology and model development. Annals of Nuclear Energy, 40, 163–170. DOI: 10.1016/j.anucene.2011.10.019.
