No. 1(65) (2022): Proceedings of Odessa Polytechnic University

Machine building

Dynamic vibration dampers for console instruments

Gennadiy Oborskyi, Alexander Orgiyan, Valentyn Tikhenko, Аnna Balaniuk, Vasyl Kolesnik

5-15
Viewed: 76 | Downloads PDF: 16

DOI: https://doi.org/10.15276/opu.1.65.2022.01
- Balaniuk
Modeling the effect of stochastic defects formed in products during machining on the loss of their functional dependencies

Аnatoly Usov, Maksym Kunitsyn, D KLYMENKO, V. DAVYDIUK

16-29
Viewed: 44 | Downloads PDF: 13

DOI: https://doi.org/10.15276/opu.1.65.2022.02
- Usov
An alternative approach to control the shaping of parts with spatially complex surfaces

Sergiy A. Zelinskiy, Andriy Zh. Tkach

30-39
Viewed: 43 | Downloads PDF: 16

DOI: https://doi.org/10.15276/opu.1.65.2022.03
- Tkach
Operation of pre-stressed span beams of bridge cranes taking into account load combinations

Anatoliy Tkachev, Oleksiy А. Tkachev, Igor Prokopovich

40-46
Viewed: 48 | Downloads PDF: 14

DOI: https://doi.org/10.15276/opu.1.65.2022.04
- Tkachev

Energetics

Application of cad technologies for research of heat exchange units of microclimate systems based on alternative energy sourcestitleapplication of cad technologies for research of heat exchange units of microclimate systems based on alternative energy sou

Oleksandr Klymchuk, Gennady A. Balasanyan, Ganna Luzhanska, Mykola Serheiev, Inna Aksyonova

47-55
Viewed: 29 | Downloads PDF: 21

DOI: https://doi.org/10.15276/opu.1.65.2022.05
- balasanyan
Thermal operating conditions of the hybrid photomodule with any expense of the heat carrier

Viktor V. Wysochin, Vladimir Ruslanovich Nikulshin, Аlla Е. Denysova

56-61
Viewed: 35 | Downloads PDF: 17

DOI: https://doi.org/10.15276/opu.1.65.2022.06
- Wysochin
Reduced air injection time during containment testing due to the use of an ejector

Volodymyr Kravchenko, Anatoliy Vlasov, Anatoliy М. Andryushchenko, Dmitry Vlasov, Andrii Holovchenko

62-69
Viewed: 76 | Downloads PDF: 17

DOI: https://doi.org/10.15276/opu.1.65.2022.07
- Kravchenko
Prevention of hydrodynamic instability conditions in safety systems with pumps of nuclear power plants

V. Kondratyk, D. Fedorov, Volodymyr Skalozubov, Yuriy Komarov, S. Kosenko

70-75
Viewed: 39 | Downloads PDF: 19

DOI: https://doi.org/10.15276/opu.1.65.2022.08
- Skalozubov
Methodological bases for designing double-circuit closed air purification systems

Olexandr G. Butenko, A. V. Karamushko, S. Smyk, V. Gushchakova

76-82
Viewed: 63 | Downloads PDF: 16

DOI: https://doi.org/10.15276/opu.1.65.2022.09
- Butenko

Informacion technology. Automation

Analysis of technologies for personalized content recommendations on the internet

Oleksii Lopakov, Lada V. Prokopovich, D. Solodkyi

83-89
Viewed: 251 | Downloads PDF: 130

DOI: https://doi.org/10.15276/opu.1.65.2022.10
- Lopakov

Metrology, standardization and certification

Metrological support of design processes using the “big bang” information model

Gennady A. Oborsky, Iraida I. Stanovska, Igor Prokopovich, Volodymyr М. Tonkonogy, Olexandr L. Stanovskyi

109-116
Viewed: 89 | Downloads PDF: 16

DOI: https://doi.org/10.15276/opu.1.65.2022.13
- Stanovska
Improvement of methods for diagnosing an oil-filled high-voltage coupling capacitor

Sergiy V. Zaitsev, Vadym V. Chichenin, Valentyn M. Tikhenko, S. Sushchinskaya, P. Mironyuk

117-128
Viewed: 29 | Downloads PDF: 15

DOI: https://doi.org/10.15276/opu.1.65.2022.14
- Chichenin (Українська)
Simulation modelling in the tasks of digital engineering in the creation of information-measuring systems

Gennady A. Oborsky, Volodymyr P. Guhnin, Lyudmyla М. Perperi, Ganna M. Goloborodko, V. Goloborodkо

129-136
Viewed: 37 | Downloads PDF: 20

DOI: https://doi.org/10.15276/opu.1.65.2022.15
- Guhnin

Chemistry. Pharmaceutical technologies. Biomedical engineering

Thermodynamic modeling of oxygen dissolvation in water

Oleg P. Musov, М. Savchenko, I. Levchuk, L. Frolova

90-98
Viewed: 52 | Downloads PDF: 20

DOI: https://doi.org/10.15276/opu.1.65.2022.11
- Musov
Method of analysis of hierarchies in decision making in medicine

Igor Prokopovich, Natalya V. Manicheva, Natalya V. Titova, Sofiia Kasian

99-108
Viewed: 250 | Downloads PDF: 56

DOI: https://doi.org/10.15276/opu.1.65.2022.12
- Prokopovich

Machine building

Dynamic vibration dampers for console instruments

Modeling the effect of stochastic defects formed in products during machining on the loss of their functional dependencies

An alternative approach to control the shaping of parts with spatially complex surfaces

Operation of pre-stressed span beams of bridge cranes taking into account load combinations

Energetics

Application of cad technologies for research of heat exchange units of microclimate systems based on alternative energy sourcestitleapplication of cad technologies for research of heat exchange units of microclimate systems based on alternative energy sou

Thermal operating conditions of the hybrid photomodule with any expense of the heat carrier

Reduced air injection time during containment testing due to the use of an ejector

Prevention of hydrodynamic instability conditions in safety systems with pumps of nuclear power plants

Methodological bases for designing double-circuit closed air purification systems

Informacion technology. Automation

Analysis of technologies for personalized content recommendations on the internet

Metrology, standardization and certification

Metrological support of design processes using the “big bang” information model

Improvement of methods for diagnosing an oil-filled high-voltage coupling capacitor

Simulation modelling in the tasks of digital engineering in the creation of information-measuring systems

Chemistry. Pharmaceutical technologies. Biomedical engineering

Thermodynamic modeling of oxygen dissolvation in water

Method of analysis of hierarchies in decision making in medicine

Current Issue

Language

Information